Reference usage:

1. Put the defective mesh on the inspection rack, dip in a proper amount of film release agent, and gently wipe the film. After it is completely soaked, let it stand for about half a minute, and the film will fall off automatically. Rinse with pressurized water.

2. The standing time of the screen needs to be extended to 2-3 minutes for the low temperature drying mesh, then the photosensitive film can fall off.

3. The release agent can not remove the photosensitive film cured at high temperature.

4. Wear protective equipment during operation.

Packing and Storage: 

5kg / barrel, 25kg / carton. Avoid light at room temperature for one year.