Reference usage:

1. Pour the Endrings Degumming Agent into a plastic container with lid.

2. Put the endrings that needs to be removed into the degumming agent, cover the barrel and seal it as much as possible.

3. Soak for 10-30 minutes (longer time in winter, shorter time in summer) and take out the endrings. Most of the endrings glue falls off. Remove the remaining glue with a high-pressure spray gun or wire brush, and then drain it with clean water and dry it.

4. If there is still residual colloid on the endrings, repeat steps 2 and 3 until it is completely removed.

5. Note:

(1)During use, appropriate amount of water can be added into the degumming plastic container to make the surface of degumming liquid sealed and reduce volatilization loss.

(2)This product is acidic and highly corrosive. When using containers and machinery, please wear protective gloves and glasses. If it drops on the skin, please wash immediately with water.

(3)This product should be stored in a dark place, and the bottle cap should be tightened immediately after use.

Packing and Storage: 

5kg / barrel, 25kg / carton. Avoid light at room temperature for one year.